Model No.: RL011
CZ flow pump IS horizontal single-stage single-suction cantilever centrifugal pump;The dimensions are in conformity with DIN24256/ISO2858.
CZ pump can transport low or high temperature liquid;Neutral or corrosive liquid, clean or containing solid particles of liquid, can be widely used and chemical, chemical fertilizer, petroleum, metallurgy, electricity, paper, food, pharmaceutical, alloy fiber and other industrial sectors.
Two. Performance characteristics of this series of pumps:
The flow (Q) can reach 2000m3/h
Head (H) up to 160m.
Working pressure (P) 2.5mpa
Operating temperature (T) --80℃--- 300℃
Stable characteristic curve, low cavitation value, high efficiency.These characteristics are also maintained during periods of discontent.
Three. CZ type Chemical Pump structure:
Install appearance, size and base are in accordance with the international standard design, can replace imported pump, import and export on the same axis, is advantageous for the design and process control of bracket including shaft, impeller, stuffing box to form a subassembly, such as the pump body does not need to be removed from the pipeline during maintenance, thus using the lengthened coupling, also don't have to remove the motor.The pressure acting on the shaft seal is compensated by the impeller or the balance hole on the impeller.Shaft seal can be used soft packing seal (also can be cooled, also can not be cooled), also can use a variety of structures single, double end machine seal.The ball bearing is durable and the diameter size is sufficient to ensure the running balance.
Horizontal rear door structure, the pump head and motor are connected by coupling, mounted on the bottom plate, the impeller is backward-open, three bearings, the shaft seal is externally mounted mechanical seal, with cooling device, the oil level of the bearing body oil mirror observation;The structure is compact and reasonable.The pump in the pump body has a foot, can bear the load from the pipeline and directly to the foundation, so that the pump rotor will not bear the load of the pump bending, so as to ensure that the load and mechanical seal has a good service life.During maintenance, it is not necessary to open the pipeline connected with the pump body. As long as the bolts of the bracket and the pump body are opened, the impeller and mechanical seal can be repaired separately, which is simple and convenient.
Pump rotation direction: from the motor end to the pump, clockwise rotation.
Four. Sealing type:
Mechanical seal or packing seal.
Five. Transportation medium:
Various temperatures and concentrations of sulfuric, nitric, hydrochloric and phosphoric acids and other inorganic and organic acids.
Alkaline solutions such as sodium hydroxide and sodium carbonate at various temperatures and concentrations.
All kinds of salt solutions.
Various liquid petrochemical products, organic compounds and other corrosive materials and products.
CZ standard chemical process titanium pump
Cz series standard chemical process pump is horizontal, single stage, single suction, radial profile separation heart pump. Its size and performance meet the standard of 1S02858.The specification of 150,400 and above is unique to the CZ pump. The pressure on the at the shaft seal are balanced by the balance hole on the side blade or the impeller.Shaft seal can be packed or mechanical seal, such as single or double seal, with a variety of sealing systems,The rear door structure and the lengthened coupling design can remove the whole rotor without removing the pump body and motor during maintenance,Flange inlet and outlet flange pressure levels have the same design level.The design standard is 2.5mpa, or 1.6mpa or ANSI150#
Specification; DN: 32~ 300mm
Flow: Q: ~2000m³/h;
Lift Head: H: ~160m;
Working Pressure: P: ~ 2.5Mpa
Working Temperature: T: ~260℃
Organic and inorganic acids such as nitric acid, sulfuric acid, hydrochloric acid and phosphoric acid.
Sodium hydroxide or sodium carbonate, etc. alkaline solution.
Liquid petrochemical products, organic compounds and other corrosive raw materials and products.
Scope of application
It is widely used in chemical and petrochemical/industrial refinery/paper mill and pulp mill/production equipment of sugar industry.
CZ standard chemical process titanium pump structural drawing
1-Pump Body 2-The impeller nut 3-Shaft 4-Impeller 5-Pump cover 6-Shaft sleeve 7.Mechanical seal 8-Jacket 9-Double end studs 10-Hexagonal nut 11-Machine sealing gland 12- Bearing box assembly 13-Front axle pressure cover 14-Cylindrical roller bearings 15-Spring retainer for hole 16-Ball contact bearing 17-Rear bearing pressure cover
CZ standard chemical process titanium pump performance range (50HZ)
CZ standard chemical process titanium pump performance sheet
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 25-30 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below:
Baoji Rowlyn Metal Materials Co., Ltd.
+86-13335484331 (Wechat and WhatsApp the same Number )
Skype : xiaohailan_1984
Baoji Rowlyn Metal Materials Co., Ltd.
- Company Name: Baoji Rowlyn Metal Materials Co., Ltd.
- Representative: Hou Wen Liang
- Product/Service: Titanium Tubes , Titanium Sheets , Titanium Pumps & Valves , Nickel Tube and sheets , Sewage Treatment Titanium Equipment , Nickel Pipeline and Part for Caustic Soda Flake
- Capital (Million US $): 2000000
- Year Established: 2015
- Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
- Export Percentage: 61% - 70%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 3
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 1,000-3,000 square meters
- Factory Location: Eastern High-Tech Zone Baoji Shaanxi China
- Contact Person: Ms. Jenell Hai
- Tel: +86-917-8999589
Premium Related Products